Tailored housings for IoT sensors

Design, protective, made from natural materials

Symbiosei home weather station. Featuring a designer enclosure, rapid CO₂ response time, and seamless Home Assistant integration.
Symbiosei home weather station. Featuring a designer enclosure, rapid CO₂ response time, and seamless Home Assistant integration.

Symbiosei has been successfully engaged in developing casings for electronic devices for a long time, below are examples of our work.

 

Gallery

CO₂ sensor for smart homes with a built-in display
CO₂ sensor for smart homes with a built-in display
Home weather station with solar activity monitoring
Home weather station with solar activity monitoring
An affordable, reliable garden sensor suitable for small-batch production, featuring remote sensors for soil temperature and moisture down to 1.5 meters, plus ambient temperature, humidity, and light level
An affordable, reliable garden sensor suitable for small-batch production, featuring remote sensors for soil temperature and moisture down to 1.5 meters, plus ambient temperature, humidity, and light level
Garden microclimate sensor in budget-friendly housing, designed for mass production
Garden microclimate sensor in budget-friendly housing, designed for mass production
Garden sensor in a housing made from natural materials
Garden sensor in a housing made from natural materials
The same features, integrated into a sleek, design-focused chassis
The same features, integrated into a sleek, design-focused chassis
Large beads made of recycled glass give the wires additional protection from ultraviolet radiation. The board with the antenna and the temperature sensor are hidden in a foam casing
Large beads made of recycled glass give the wires additional protection from ultraviolet radiation. The board with the antenna and the temperature sensor are hidden in a foam casing
All electronics is inside a bamboo case. Practical and cheap, except for the original painting. On the left is a case based on an Indonesian mask
All electronics is inside a bamboo case. Practical and cheap, except for the original painting. On the left is a case based on an Indonesian mask
Collection of climate sensors made of natural materials from our Middle East office
Collection of climate sensors made of natural materials from our Middle East office
Sensor with decorative facade. All electronics is hidden behind an Indonesian mask under a small wooden canopy
Sensor with decorative facade. All electronics is hidden behind an Indonesian mask under a small wooden canopy
A simple board with painting is an almost finished decorative case
A simple board with painting is an almost finished decorative case
Sometimes you can just wrap the wire around a stick. All connecting wires have a sufficient level of protection and are suitable for outdoor installation
Sometimes you can just wrap the wire around a stick. All connecting wires have a sufficient level of protection and are suitable for outdoor installation
Unit from the first pre-production series. The housing design and its finish – developed in collaboration with our Egyptian client. In this project, the main constraints were budget and deployment speed
Unit from the first pre-production series. The housing design and its finish – developed in collaboration with our Egyptian client. In this project, the main constraints were budget and deployment speed
Unit from the pre-production series destined for the Egyptian client, shown in a top-down view
Unit from the pre-production series destined for the Egyptian client, shown in a top-down view
Device from the pilot batch in a low-cost plastic housing – the design and practical implementation were handled by our client from Egypt
Device from the pilot batch in a low-cost plastic housing – the design and practical implementation were handled by our client from Egypt